The Stovebolt Site Forums The Shop Area Paint and Body Shop smoothing pounded out dents

Brrrr

Winter is Coming
Time to think about winterizing your Bolt.
Shaffer's 1950 ranch truck used ALL year

A good Tech Tip
WINTERIZING YOUR TRUCK
including a link back to the Forums for additional tips.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

0 members (), 172 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,274

Posts1,058,433

Members48,490

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: smoothing pounded out dents #126183 05/14/2007 9:19 AM
Joined: Apr 2005 Posts: 641 north west 3 32fire2 Shop Shark
32fire2 Shop Shark 3 Joined: Apr 2005 Posts: 641 north west	you can tak jb weld put it on the dempled area and put masking tape over it shape it smooth with your hand let it harden remove tape sand smooth and its ready for paint wont take you 5 minutes

Entire Thread
Subject	Posted By	Posted
smoothing pounded out dents	bigmacdaddy	05/14/2007 3:05 AM
Re: smoothing pounded out dents	MARTINSR	05/14/2007 4:09 AM
Re: smoothing pounded out dents	atomarc	05/14/2007 4:44 AM
Re: smoothing pounded out dents	bigmacdaddy	05/14/2007 6:15 AM
Re: smoothing pounded out dents	32fire2	05/14/2007 9:19 AM
Re: smoothing pounded out dents	SW_Radial	05/14/2007 10:39 AM
Re: smoothing pounded out dents	tclederman	05/14/2007 12:24 PM
Re: smoothing pounded out dents	Ghostrider	05/14/2007 12:52 PM
Re: smoothing pounded out dents	MARTINSR	05/14/2007 3:00 PM
Re: smoothing pounded out dents	sevt_chevelle	05/14/2007 4:39 PM
Re: smoothing pounded out dents	Blake51	05/14/2007 5:49 PM
Re: smoothing pounded out dents	tclederman	05/14/2007 6:34 PM
Re: smoothing pounded out dents	Chev4t6	05/14/2007 6:42 PM
Re: smoothing pounded out dents	MARTINSR	05/15/2007 4:37 AM
Re: smoothing pounded out dents	Denny Graham	05/15/2007 6:13 PM
Re: smoothing pounded out dents	mapleleaf	05/15/2007 7:42 PM
Re: smoothing pounded out dents	sevt_chevelle	05/16/2007 1:17 AM
Re: smoothing pounded out dents	down2sea	05/16/2007 2:49 AM
Re: smoothing pounded out dents	bigmacdaddy	05/16/2007 3:34 AM

Moderated by klhansen

Hop To

Link Copied to Clipboard