| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,131 Posts1,056,722 Members48,454 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2002 Posts: 2,168 A teacher, but always an apprentice. | | A teacher, but always an apprentice. Joined: Apr 2002 Posts: 2,168 | Dusty,
Yes it is curved. My tape was held against the cab door frame. I did not bend my tape at all. Used a a straight edge to center on bolt. My wife was holding the other end. 1/16th out? I'd suspect that's well within standards of the 50's on door fitment.
I know mine didn't fit worth blah. | | | |
Entire Thread
|  
need a measurement, lower door hinge bolts
| rmw667 | 01/05/2018 3:15 AM | |
Re: need a measurement, lower door hinge bolts
| Achipmunk | 01/05/2018 3:32 AM | |
Re: need a measurement, lower door hinge bolts
| rmw667 | 01/05/2018 3:34 AM | |
Re: need a measurement, lower door hinge bolts
| Achipmunk | 01/05/2018 3:42 AM | |
Re: need a measurement, lower door hinge bolts
| bowtietim | 01/05/2018 3:58 AM | |
Re: need a measurement, lower door hinge bolts
| tclederman | 01/05/2018 4:12 AM | |
Re: need a measurement, lower door hinge bolts
| jorb | 01/05/2018 5:05 AM | |
Re: need a measurement, lower door hinge bolts
| rmw667 | 01/05/2018 3:04 PM | |
Re: need a measurement, lower door hinge bolts
| Dusty53 | 01/05/2018 7:33 PM | |
Re: need a measurement, lower door hinge bolts
| Fox | 01/06/2018 12:44 AM | |
Re: need a measurement, lower door hinge bolts
| Dusty53 | 01/07/2018 2:34 AM | |
Re: need a measurement, lower door hinge bolts
| Fox | 01/09/2018 5:15 AM | |
Re: need a measurement, lower door hinge bolts
| Dusty53 | 01/10/2018 2:09 AM | |
|
|
| |
