Hey folks, a question please. First, I’ve read hundreds of Post and google searches until I can’t see straight anymore. My ’50 Chevy 3100 (216) needs a rebuild (0 compression in all but one cyl). I also acquired a ’53 235 with a casting date of G 20 3 (Jul 20, 1953) which is not yet in my possession, so I don’t yet know the casting number. It currently has a stick tranny, but I don’t know if that’s original. Also, it’s not in a vehicle, so that’s no help yet either.
Since this date is near the introduction of the Full Pressure oil system and Insert Bearings, is it possible to determine (aside from pulling the oil pan), if this is a splash oiling and/or Babbitted eng? This eng has the smaller passenger side plate and (4) valve cover screws. It does NOT have the small Kidney shaped cover on drivers side. I should have the casting number shortly, but I suspect that still won’t answer my question. Sure would appreciate some input, thanks, Jim
