| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,049 Posts1,055,677 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#12294 11/14/2003 9:16 PM | Joined: Apr 2002 Posts: 146 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2002 Posts: 146 | I have been working on adding power steering. I have the pump in place but it's pulley did not line up with the crank pulley by about 1/2". The pulley is only made from heavy sheet metal so I made a fixture and pressed the bushing back the 1/2". Now it wobbles about 1/32" guess my press is out of square. Is that too much? How much runout is OK for a belt driven accessory?
if it dosen't need fixed, break it
| | |
|
|
| |
