| |
Click on image for the lowdown. 
====
| | |
8 members (Gdads51, Youngin' Tut 59, Otto Skorzeny, tclederman, 3800GUY, walter74, LAROKE, 1 invisible),
70
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,116 Posts1,056,599 Members48,448 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2007 Posts: 33 'Bolter | | 'Bolter Joined: Aug 2007 Posts: 33 | I removed the four U joint bolts that hold the drive shaft/torque tube to the transmission. Then I slid the yoke off the splined shaft. The yoke has a lot of movement on the bearing caps. It looks like there are inside clips on the u joint, and there is space between the clips and the yoke. It almost seems like it should have outside clips to prevent so much movement. Are the bearing caps pressed into the yoke, or should they be loose as mine are now? Thanks
TommyJ | | |
|
|
| |
