| |
Click on image for the lowdown. 
====
| | |
8 members (TUTS 59, wilbur53, Joe H, tclederman, Charles in CA, kades51, 2 invisible),
74
guests, and
7
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,187 Posts1,057,211 Members48,465 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2001 Posts: 428 Shop Shark | | Shop Shark Joined: Oct 2001 Posts: 428 | I ordered a new rocker panel for my '70 C10 from LMC and the thickness was close to, if not the same as the original. The fit was almost dead on; required only a small amount of hammer work to form a perfect fit.
Cribb66, I would assume the same to be true for you. Just remember, every truck is a little different so you will have to do some fitting with any replacement panels to get them to line up just right.
This may sound obvious, but never cut anything until you have the new panels in hand and can see exactly where you need to cut for a good fit with the new pieces. | | |
|
|
| |
