| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,050 Posts1,055,671 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2001 Posts: 154 Wrench Fetcher | | Wrench Fetcher Joined: Aug 2001 Posts: 154 | I have found the hood fit never was the greatest even new from the factory. I swear if I didn't take it apart I would think all the stuff was from different trucks. With enough time and patience you can fit it up respectfully. To get my hood down on the cowl seal I had to shim the center brace with washers, it pulls the center down. I had to shim my inner fenders where they bolted to the radiator support to gain width for the hood at the front, then with every thing loose at floor bolts you can really move the front around with the cowl brace rods. I did have new hinges and new deluxe outer cowl panels which go from bottom to lead seam. Look here http://community.webshots.com/user/zeker6 Zeke (Put lots of tape down to protect the paint while fitting.)
The Amish Connection
51 Chevy 1/2 ton 5 window,Vortec hotrod, no horse
| | |
|
|
| |
