| |
Click on image for the lowdown. 
====
| | |
3 members (sron48, Otto Skorzeny, 1 invisible),
89
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,154 Posts1,056,856 Members48,456 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2001 Posts: 5,337 'Bolter | | 'Bolter Joined: Jan 2001 Posts: 5,337 | The housing will pull off once the snap ring is expanded, but you risk loosing the roller bearings at the front of the shaft if you pull the shaft back to much. 1/2" is likely to be to much.
I would at the very least pull the side cover so you can watch to be sure the roller bearings do not fall out.
See the USA in your vintage Chevrolet! My Blog | | |
|
|
| |
