The Stovebolt Site Forums The Shop Area The Electrical Bay Generator

Labor Day

Labor Day

Putting down your wrenches or time for
MORE wrenching?
Wrenching this Labor Day

Plenty of places to share.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

2 members (TUTS 59, JW51), 49 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,009

Posts1,055,296

Members48,419

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Generator rickmg #1175274 07/24/2016 6:36 PM
Joined: Feb 2011 Posts: 583 michigan R rickmg 'Bolter
rickmg 'Bolter R Joined: Feb 2011 Posts: 583 michigan	You were close Pre '68 Dave. The pulley is two pieces riveted together. The rivets were loose and the pulley was rubbing against the end frame. Reset the rivets and problem solved. The number on the generator is 100004, 6 volt, 3 brush. Thanks Rick 1939 Chevrolet Stake Truck

Entire Thread
Subject	Posted By	Posted
Generator	rickmg	07/24/2016 2:11 AM
Re: Generator	3B	07/24/2016 4:11 AM
Re: Generator	Grigg	07/24/2016 1:17 PM
Re: Generator	Hotrod Lincoln	07/24/2016 3:18 PM
Re: Generator	Pre '68 Dave	07/24/2016 3:39 PM
Re: Generator	rickmg	07/24/2016 6:36 PM
Re: Generator	Grigg	07/25/2016 4:01 AM
Re: Generator	rickmg	07/25/2016 1:48 PM
Re: Generator	Grigg	07/25/2016 4:55 PM
Re: Generator	Kennethw	07/28/2016 10:08 PM

Moderated by Jon G, Rusty Rod

Hop To

Link Copied to Clipboard