Hi all- I just replace the rear brake cylinder on Big Red. When I went to put the drum back on it was almost impossible to turn. It would turn, just a lot of effort. Any ideas what may be causing this?
Second question
I figured while I had the rear drum off I would look at the bearings. first thing I found was the previous owner had pressed the seal back in and used some lock tite to keep it in. (it has been rough weekend and kinda took my frustrations out on the seal.) Now that it's trashed I need to get a new on. On inspecting the bearing It was very low on grease. It also had some play in it. Is the play ok, if the bearing is on the axel the movement would be in and out along the axel.
Thanks in advance
Andy
