Thought I would update the list and move it here.
-- 3/4 drive socket set, up to 1-5/8 (Don. Plus one set on site)
-- 1-inch drive impact hammer (on site but only socket is one for Budd lugs))
-- Propane torch (John)
-- 5' pry bar for the truck tear down (Don).
-- Kennedy tool box for Grigg (Don).
-- Some other Machinist tools for Grigg to caress (Don)
-- Anvils (Don)
-- Bottle opener, but I don't know why. (ALL! smile )
-- 10x10 awning (Don)
-- Jacks
-- Floor jack (On site, plus one with Gary)
-- High Lift Jack (One on site. Another is always handy)
-- Tube tools, benders and a good flare kit (Grigg)
-- Chain Fall (on site)
-- Jack stands, engine stand and a engine hoist (Gary)
-- Engine storage & shipping rack (Returning with Alec. Available for next user)
-- Mig Welder (Hambone)
-- Stick welder (on site)
-- Oxy-Acetylene (on site)
-- Tractor (on site)
-- Hand impact driver and full set of bits including clutch head (Grigg)
-- I'm already on the list for tube tools.
If you have need of them, try to round up ahead of time all the tube nuts and other fittings you may need.
If something odd let me know and I'll look up a part number for you (if available) and or look in my stash. (Grigg)
-- A-Frame (looks like a swing set) with 1/2 ton chain fall. (Mike B)
-- 2-ton folding leg cherry picker w/engine leveler. (Mike B)
-- Per Joker's suggestion, monkey wrench. (Don)
Let me know if this list is correct or not.
Don
Last edited by 2-Ton; 04/30/2016 7:31 PM.
