Thinking about throwing some extra tools in the truck, to be better prepared this year. None of us can have all the tools, but together, we can.
If I really get working, a set of trailer axles that need to be straightened and aligned. That could also be a clinic on shaft straightening.
================================================
(John here -- with all the tool discussion, here's the master list so far -- Tools identified and who's bringing them)
-- 3/4 drive socket set, up to 1-5/8 (Don. Plus one set on site)
-- 1-inch drive impact hammer (on site but only socket is one for Budd lugs))
-- Propane torch (John)
-- 5' pry bar for the truck tear down (Don).
-- Kennedy tool box for Grigg (Don).
-- Some other Machinist tools for Grigg to caress (Don)
-- Anvils (Don)
-- Bottle opener, but I don't know why. (ALL!
)
-- 10x10 awning (Don)
-- Jacks
Floor jack (On site, plus one with Gary)
High Lift Jack (One on site. Another is always handy)
-- Tube tools, benders and a good flare kit (Grigg)
-- engine leveling-lifting-thingamajig (Grigg)
-- Chain Fall (on site)
-- Jack stands, engine stand and a engine hoist (Gary)
-- Engine storage & shipping rack (Returning with Alec. Available for next user)
-- Mig Welder (Hambone)
-- Stick welder (on site)
-- Oxy-Acetylene (on site)
-- Tractor (on site)
-- Metal Band Saw (Grigg)
Don
