| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,034 Posts1,055,539 Members48,425 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2000 Posts: 1,438 'Bolter | | 'Bolter Joined: Aug 2000 Posts: 1,438 | I screwed it to the door frame by drilling 4 small holes. One near each end at the bottom and one about 2" below the top just before it makes the bends. When I redo it, I may drill a hole either at the center of the bends or just after so those corners can be pulled in a bit tighter. The stuff is bendable, but I had a little trouble getting it tight in the corners. It did conform to the glass though. Hope this helps.
Dennis
40 Chevy 1/2 ton
| | |
|
|
| |
