| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,123 Posts1,056,653 Members48,450 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2005 Posts: 6,100 'Bolter | | 'Bolter Joined: Nov 2005 Posts: 6,100 | Hy ff171, I assume the two screws are holding the brake drum to the hub, when you tighten up the screws you bring the brake drum up tight against the hub, duplicating what the wheel and wheel nuts would do. So if you are experiencing a rub there may be a burr on the outside of the hub or the inside of the drum, maybe an errant piece of gasket material. If you can turn the wheel by hand in either direction when the screws are tight I wouldn't worry about it too much. Have you adjusted the brakes yet? | | |
|
|
| |
