The Stovebolt Site Forums The Parking Lot Big Bolts 1946 2ton brake rebuild questions

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

3 members (TUTS 59, Phak1, WICruiser), 92 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,167

Posts1,057,022

Members48,458

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: 1946 2ton brake rebuild questions JLM #1129911 10/17/2015 5:07 PM
Joined: Sep 2015 Posts: 89 Bridgeport, TX J JLM Shop Shark
JLM Shop Shark J Joined: Sep 2015 Posts: 89 Bridgeport, TX	It looked like there was regular grease in it, after removing the axle there was a thin metal gasket, then the 2 locking nuts and a retaining tang deal, then drum came off and there was a bearing and cup that backed up against the hub. 1946 Chevrolet 2-ton

Entire Thread
Subject	Posted By	Posted
1946 2ton brake rebuild questions	JLM	10/17/2015 3:16 PM
Re: 1946 2ton brake rebuild questions	3B	10/17/2015 4:34 PM
Re: 1946 2ton brake rebuild questions	JLM	10/17/2015 5:07 PM
Re: 1946 2ton brake rebuild questions	Mike B	10/18/2015 5:19 AM
Re: 1946 2ton brake rebuild questions	JLM	10/18/2015 10:42 PM

Moderated by 69Cuda, Super55

Hop To

Link Copied to Clipboard