here's my layout. i drilled another hole and re-positioned the left side knob array so I had spacing between the switches

ALL switches are visible ... the two switches placed below @ center are for the heated seats.

http://s67.photobucket.com/user/1951otter/media/DSC00328.jpg.html?sort=6&o=358

the final shows the heater switch with a 'C' for climate ........ not choke
i have a 292 with a 4 barrel and no choke needed. the throttle was not needed either.
on the far left is a stock H/L switch, a double pull switch for the safety start and FOG lamp positions and
a wiper switch for the electric wipers i installed.

five LED lights for L/R turn signals,
high beam
oil pressure switch
alternator

so see how i made the switch fit the dash

http://s67.photobucket.com/user/1951otter/media/1A-1.jpg.html?sort=6&o=230

by using two different washers a flat stock bar, and a coupler to connect the knob to the switch posts installed because the switch needed to be moved away from the dash due to limited space.


http://s67.photobucket.com/user/1951otter/media/0A.jpg.html?sort=6&o=231

http://s67.photobucket.com/user/1951otter/media/IMG000.jpg.html?sort=6&o=228

i had to move it up and i also don't have an arkansas throttle so that position can be used for another knob when the time comes

http://s67.photobucket.com/user/1951otter/media/0732700-R1-050-23A.jpg.html?sort=6&o=194



Last edited by carolines truck; 10/09/2015 5:08 PM.
Jim & Caroline
The highway is for gamblers, better use your good sense."
Gooday-that's my 1¢ answer due to the lousy economy ~ cause I ain't got - no . mo . doe
Every Shaver | Now Can Snore | Six More Minutes | Than Before ... | Half A Pound for Half a Dollar | Spread On Thin | Above the Collar || BURMA-SHAVE