4 ton truck

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

3 members (Shaffer's1950, Bill Hanlon, Hotrod Lincoln), 143 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,190

Posts1,057,339

Members48,469

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: 1/2 ton axle on 3/4 ton truck Matt_The_Hoople #1124953 09/19/2015 3:32 AM
Joined: Dec 2013 Posts: 54 NE Kansas, USA S sleepindawg Wrench Fetcher
sleepindawg Wrench Fetcher S Joined: Dec 2013 Posts: 54 NE Kansas, USA	The springs in the front are supposed to be the same between 3100 and 3600 in the AD series trucks. Just use the correct u-bolts for the 3100 and your good as gold. Tim 1950 3600 Some Pictures 1951 3100 1952 3100 Some Pictures

Entire Thread
Subject	Posted By	Posted
1/2 ton axle on 3/4 ton truck	Matt_The_Hoople	09/18/2015 9:14 PM
Re: 1/2 ton axle on 3/4 ton truck	LONGBOX55	09/18/2015 9:20 PM
Re: 1/2 ton axle on 3/4 ton truck	Matt_The_Hoople	09/18/2015 9:23 PM
Re: 1/2 ton axle on 3/4 ton truck	Matt_The_Hoople	09/18/2015 9:23 PM
Re: 1/2 ton axle on 3/4 ton truck	sleepindawg	09/19/2015 3:32 AM
Re: 1/2 ton axle on 3/4 ton truck	Whitedog	09/20/2015 6:13 AM
Re: 1/2 ton axle on 3/4 ton truck	Hotrod Lincoln	09/21/2015 3:16 AM
Re: 1/2 ton axle on 3/4 ton truck	Whitedog	09/21/2015 3:32 AM
Re: 1/2 ton axle on 3/4 ton truck	Matt_The_Hoople	09/27/2015 10:21 PM
Re: 1/2 ton axle on 3/4 ton truck	sleepindawg	09/29/2015 1:56 PM
Re: 1/2 ton axle on 3/4 ton truck	mikec4193	09/29/2015 6:56 PM

Moderated by Fibonachu, KCMongo

Hop To

Link Copied to Clipboard