| |
Click on image for the lowdown. 
====
| | |
7 members (MickeyP, jmoore, GMCJammer51, TPR57C, Eisenholtz, 55shaker, 1 invisible),
107
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,115 Posts1,056,627 Members48,450 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2013 Posts: 98 Shop Shark | | Shop Shark Joined: Oct 2013 Posts: 98 | I had the same problem with my 52. I Removed the shifter, drove out the two pins on the side of the tranny neck and inserted two larger roll pins. This made up for the wear in the shifter and took out a lot of the slop. Both the original pins and the shifter slots wear over time partially due to constant pressure on them by drivers keeping their hand on the shifter while driving. Good luck.
1952 Chevy 3100
Semper Fi !
| | |
|
|
| |
