Woldron might be the outfit that a friend of mine had bend
pipes for his fantastically accurate restoration.
I'll stick my neck out again by saying that most all the
muffler shops that I've talked with will only bend the exhaust
pipe using the standard radius dies, which makes a rather
sharp bend in the down pipe leading back to the muffler. I've
requested that they step bend it to open up the radius but
they don't seem to know how to do that.
The original factory exhaust pipes were made with a large
radius sweeping bend in the exhaust.
http://www.pbase.com/dennygraham/image/122229771/large Bob R, ya'll still out there????
Denny Graham
Sandwich, IL
