The Stovebolt Site Forums The Parking Lot Big Bolts Automatic for a 2-ton 59 Viking

Ulf,

Once you get the bell housing you'll need this kit that bolts to the factory crossmember holes and to the front of your sbc motor (make sure your motor has the 2-mounting holes drilled and tapped on each side of the timing cover).

http://www.classicparts.com/1955-59-Original-V-8-Conversion-Set/productinfo/79-375/#.VQrxT47F-T8

You will also need the V8 carb linkage assembly (also available from Classic Parts) and a radiator shroud (you may need to make this).

Hope this helps,

Mike B