| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,060 Posts1,055,840 Members48,427 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2001 Posts: 3,458 Extreme Gabster | | Extreme Gabster Joined: Oct 2001 Posts: 3,458 | I primed my bike tank tonight. It's looking pretty good, but I have a few spots I didn't sand flat enough on the filler. It's off a 1974 Honda CB750K4. The emblems fit over the holes on the side.
Here it is:
[img]http://home.comcast.net/~josiahbartlett/pictures/tank.jpg[/img]
I used Martin Seniour 2k primer with a Taiwanese gravity feed HVLP gun with 1.5mm tip set at 50 psi.
I didn't bother to mask off the cap because I am replacing the gasket anyway. The inside is lined with POR-15 fuel tank sealer.
Paint & Body Shop moderator
A lone amateur built the Ark. A large group of professionals built the Titanic. | | |
|
|
| |
