| |
Click on image for the lowdown. 
====
| | |
2 members (Ponchogl, Hush),
67
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,024 Posts1,055,395 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jul 2007 Posts: 328 'Bolter | | 'Bolter Joined: Jul 2007 Posts: 328 | I made all my brake and fuel lines for my 51 panel truck.
I also did the same for my 58 Buick Roadmaster 75 & 49 Willys-Overland Jeepster.
I enjoyed doing it "my" way instead of hoping that the pre-made kit would fit/wasn't beat up in shipping/or was missing parts/ or of poor quality.
You can use the pre-made/flared lines sold at the auto parts store and
a handful of fittings. They make them in various lengths from just a few inches to 5 or 6 feet. Just go slow and a section at a time. Invest in a good flaring tool and a couple of different types of bending tools.
Once you know all the lengths available you should be able to get under there and get it all figured out on paper before you go purchase all the bits and pieces.
I'll be you 'll do a great job & acquire a valuable experience for the future.
my 2 cents
mike
| | |
|
|
| |
