Hey guys,
Yesterday I just happened to walk by my 41 and noticed some liquid ponding on the RF rim. Investigation revealed that the wheel cylinder bleeder screw is not seating. I backed out the screw, and retightened as an attempt to "reseat" the screw but it is still weeping. The cylinder is original to the truck (Delco) and has been resleeved with stainless about 2 years ago but with little mileage. Don't rebuilders examine/rebuild the bleeder seats? The bleeder screw is new. The other three corners seem fine.
What can be done to solve this type of leak less removal of the cylinder?
Paul
