Well, I got the rear in, just drilled the locating holes larger to 13/16ths but pinion angle is way too high. Just a wedge should take care of it. And had to grind the spring perch sides to use the stock stock U-bolts. Not much, just a 1/8 or so on each side.

By looking at it, the drive shaft just might be closer than I originally thought.
Also, was able to drop the front end and got a sinkin feeling by staring at the front center-link.. Very different than the '64's.

Sure is nice to have a big front end loader to move things instead of pushing..

Here's some pics
http://imageshack.com/a/img743/9083/vXZLs4.jpg

http://imageshack.com/a/img745/5134/6WgsGC.jpg

http://imageshack.com/a/img537/1584/UWDRTy.jpg

http://imageshack.com/a/img909/7010/yfEi9N.jpg

I used to be able to post pics directly but since I had my PC worked on and upgraded with Imageshack, It seems that all I can give is a link.

E

Last edited by Errol; 09/23/2014 4:12 AM.