The Stovebolt Site Forums The Shop Area Driveline How to re-grease bushings/fittings with old hardened grease?

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

2 members (Hotrod Lincoln, Jimmie D), 55 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,211

Posts1,057,475

Members48,473

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: How to re-grease bushings/fittings with old hardened grease? SeatGuy #1053801 09/03/2014 4:25 PM
Joined: Nov 2006 Posts: 2,544 osceola, wi D don stocker Shop Shark
don stocker Shop Shark D Joined: Nov 2006 Posts: 2,544 osceola, wi	You can use a small propane torch and warm things up. Just be cautious that you don't melt the rubber boot for the joint. Once things are warm pump lots of fresh grease into joint.

Entire Thread
Subject	Posted By	Posted
How to re-grease bushings/fittings with old hardened grease?	SeatGuy	09/03/2014 4:05 PM
Re: How to re-grease bushings/fittings with old hardened grease?	don stocker	09/03/2014 4:25 PM
Re: How to re-grease bushings/fittings with old hardened grease?	Flxible	09/03/2014 4:34 PM
Re: How to re-grease bushings/fittings with old hardened grease?	chadkiser	09/03/2014 4:41 PM
Re: How to re-grease bushings/fittings with old hardened grease?	SeatGuy	09/03/2014 6:07 PM
Re: How to re-grease bushings/fittings with old hardened grease?	don stocker	09/03/2014 7:12 PM
Re: How to re-grease bushings/fittings with old hardened grease?	Sedgewick	09/04/2014 2:43 AM
Re: How to re-grease bushings/fittings with old hardened grease?	Jim Sears	09/04/2014 5:09 AM
Re: How to re-grease bushings/fittings with old hardened grease?	don stocker	09/04/2014 12:47 PM
Re: How to re-grease bushings/fittings with old hardened grease?	Achipmunk	09/11/2014 3:06 AM
Re: How to re-grease bushings/fittings with old hardened grease?	Squire	09/11/2014 5:31 PM
Re: How to re-grease bushings/fittings with old hardened grease?	Jim Sears	09/12/2014 5:33 AM
Re: How to re-grease bushings/fittings with old hardened grease?	SimS	09/12/2014 12:41 PM

Moderated by Dusty53, SWEET

Hop To

Link Copied to Clipboard