4 years ago lay
my copped up dash with the dash
removed I filled it up a load of
moden crap. The A/C
fan had to draw in some fresh air and here was good as
any spot, with that
completed it gave me room for
some side window
defrost. The hunt for right hand dash parts was not good, so I filpped the dash leaving the Chev
print up side down, a bash on the anvil and a polish it just
may work. To make it look right I had to cut out the
throttle cable support and
plug and weld. Finaly and hope I have not forgoten anything it was time to
stich it all back
together again. I thought I would never see the day to drive with the dash fully welded
back in. Thanks. now for a moden twist to the doors.
