Welcome to the "Bolt"! trere are a bungh of the '60-66 "big" trucks around here,but the fenders are toast. It's hard to find a good set of "Big Bolt" fenders!Is the axle still intact,(wheels,hubs,steering linkage),on the G.M.C. 5500? Does it have Dayton,(spoke)wheels? If the axle incorporates regular "Budd's",you should be able to swap the G.M.C. axle,for the Chevy,without too much difficulty. If it has "Dayton's",you may want to swap the rear axle,as well. Good news is,radials are easier to install on the "Daytons",since the rims are simply bolted to the spokes! The bigger Chevy's used the flared fenders,as well. if the 5500 is complete,and you're able to get it for a reasonable price,this may make a good swap! Good luck!
Last edited by wetwilly5757; 08/03/2014 5:22 PM.
