I don't have any photos either, but the carriage bolts (3/8" I think) drop in from the top. I used nyloc nuts on the bolts as you are not supposed to put more than 5 lbs torque on the nut (IIRC). I had to add 1/4" of shims (in addition to rubber pad) to get the hood and fender fitment the best I could. I made the shims from aluminum flat bar stock.

Last edited by DavidF; 06/11/2014 2:13 PM.
1952 Chevrolet 3100
In the Stovebolt Gallery
More pics on Photobucket