| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,126 Posts1,056,354 Members48,441 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2009 Posts: 1,596 'Bolter | | 'Bolter Joined: Jun 2009 Posts: 1,596 | On mine I did the back piece first. Start on one side above the door, towards the back cornerb and then work towards the other side across the back. I used an awl to help locate the holes through the metal trim piece, headliner, and into the holes in the interior sheetmetal of the cab. Then do the front piece in a similar way. It wasn't hard, but it can get frustrating at times. Just go slow and bend very carefully so as not to get creasing. I didn't wet it or anything, just worked slow and careful. | | |
|
|
| |
