| |
Click on image for the lowdown. 
====
| | |
7 members (Bill Hanlon, Otto Skorzeny, TexasA&M48Truck, John L., 55shaker, Wally / Montana, Uncles51),
96
guests, and
6
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,075 Posts1,056,003 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2002 Posts: 9,115 'Bolter | | 'Bolter Joined: Mar 2002 Posts: 9,115 | You will need to remove the hub and then the oil seal is accessible on the inner side of the hub. There is no need to remove the bearing. You will probably find that your brake shoes have oil on them and that contamination will cause them to grab.
The manual talks about the oil seal on page 4-11. It tells how to remove the outer bearing and the seal but you only have to remove the seal. On the next page it explains how to adjust the bearing when installing the hub. The illustration is helpful as it shows how the hub is secured. | | |
|
|
| |
