That is what this one is Larry, a single axle dump I use around the farm. It's getting hard to start and is really down on power coming up the hill.
I was hoping to hear the cams never wear out. Not sure if I want to get that deep into it. I have a nice 350 I can replace it with if it has to come out.
As soon as it warms up a bit I hope to do a compression test. I'll look at the valve lift at the rocker arms at the same time.
I've always heard the old 366 had pretty good torque at low rpm.
Last edited by Coyote; 02/28/2014 5:57 PM.
