The Stovebolt Site Forums The Shop Area Engine Shop 366 big block camshaft

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

0 members (), 151 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,089

Posts1,056,141

Members48,436

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

366 big block camshaft #1010534 02/28/2014 5:14 PM
Joined: Nov 2005 Posts: 116 North Tx C Coyote Wrench Fetcher
Coyote Wrench Fetcher C Joined: Nov 2005 Posts: 116 North Tx	I have '72 C60 with a very tired 366. Oil pressure is good and it doesn't seem to use much oil. Once I get it warmed up it seems to idle fairly smooth. Do the cams ever go flat on these engines? I'm wondering about pulling the heads and re-ringing it in frame. I've never attempted an in frame overhaul before, rebuilt several small blocks on stands. Any tips, advice?

Entire Thread
Subject	Posted By	Posted
366 big block camshaft	Coyote	02/28/2014 5:14 PM
Re: 366 big block camshaft	LarryW	02/28/2014 5:20 PM
Re: 366 big block camshaft	Coyote	02/28/2014 5:53 PM
Re: 366 big block camshaft	baldybenny	02/28/2014 7:44 PM
Re: 366 big block camshaft	JohnCalogero	03/09/2014 3:03 AM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard