| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,127 Posts1,056,357 Members48,441 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2012 Posts: 1,747 'Bolter | | 'Bolter Joined: Jun 2012 Posts: 1,747 | If the set up is like the AD light bucket. Then you will have to pull them and grind or drill the rivet that holds the spring to the bucket. Use a screw and a nut to replace the rivet. A little LocTite, a little paint and you are done. I drilled from the back side and it all came apart pretty easy. Added bonus, I could move the spring about to get it in a straight "pull" position. I did take some time to smooth out the wear/rub area before paint. I don't know if it matters but rust is not my friend.
Steve H
| | |
|
|
| |
