| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,091 Posts1,056,038 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2010 Posts: 126 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2010 Posts: 126 | I have a 66 c-30 with a 327, currently semi defunct. The passenger side exhaust manifold was leaking at the exhaust pipe, i went to tighten the bolts and broke the corners of the flange on 2 bolts. I could take it off and weld the pieces back on, but since its a work in progress i figure that if the old one has to come off, if new ones arnt stupid expensive; new ones should go back on! Long story short- this is a project i bought in horrid condition, now its just in bad condition. Its a daily driver sort of rat rodish, i dont need super high end manifolds, wouldnt mind just replacing the ram horns with new ones, im just looking for ideas with the same style manifolds. It is square port, and the pipes are already done. Im looking for "bolt on" replacements. Any input would be greatly appreciated!
66' Chevy C-30 Rat
| | | | | Joined: Jun 2004 Posts: 8,597 Riding in the Passing Lane | | Riding in the Passing Lane Joined: Jun 2004 Posts: 8,597 | There should be plenty of used ones avail. Put an ad in the parts wanted. Look in Craigslist & E-bay. If there are salvage lots in your area that have some older stuff check that or a local swap meet.
They say money can't buy happiness. It can buy old Chevy trucks though. Same thing. 1972 Chevy c10 Cheyenne SuperIn the Gallery Forum | | | | | Joined: Apr 2005 Posts: 2,097 'Bolter | | 'Bolter Joined: Apr 2005 Posts: 2,097 | Dorman makes a good replacement rams horn manifold. Prices are reasonable. Most of the aftermarket suppliers are ridiculous.
Still lots of them available at swap meets.
Fred
1956 3100 Pickup/Red/350/3sp OD/PS/Disc Brakes
1957 Bel Air Sport Coupe/Red/355/TH350/PS/Disc Brakes
2017 Silverado LT Single Cab SB/Black/5.3/6 Speed Trans
1947 Willys CJ2A w/F-Head engine
| | | | | Joined: Mar 2008 Posts: 1,775 'Bolter | | 'Bolter Joined: Mar 2008 Posts: 1,775 | | | | | | Joined: Apr 2010 Posts: 126 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2010 Posts: 126 | I got a junk yard one to get me by for a minute, but ill be getting new ones here shortly. Thank you guys for your help!
66' Chevy C-30 Rat
| | |
|
|
| |
