| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,034 Posts1,055,547 Members48,425 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2011 Posts: 23 Wrench Fetcher | | Wrench Fetcher Joined: Dec 2011 Posts: 23 | http://s1092.photobucket.com/user/fnlkal76/slideshow/
I have a 1954 Gmc 5 window long bed I am attempting to restore for my 5 year old son. It had a 4 speed in it originally. I would like to put a hydro matic in it. I have since purchased a rolling chassis with a motor and tranny and rear axle. It is a short bed. Right now I am stuck. I would like to put the hydromantic on the long bed frame and convert it to disc brakes. I would like to also like to have either the motor in the roller or the one that came out of the long bed rebuilt. Like I said I am at a point and stuck. The frame and tranny and disc conversion I don’t want to tackle that myself. Willing to send out to get done. I have attached pics. Any help would be greatly appreciated
Last edited by hunterdad04; 04/28/2013 11:34 AM.
| | | | | Joined: Dec 2011 Posts: 23 Wrench Fetcher | | Wrench Fetcher Joined: Dec 2011 Posts: 23 | I cannot get that link to pics at the bottom. Have to copy and paste. | | | | | Joined: Sep 2001 Posts: 29,269 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,269 |
Hydra-Matic
What are your questions (or, what are you stuck on)?
If you have a 1954 GMC short-bed Hydra-Matic drive train (in the "donor" truck), it is a fully enclosed drive shaft. Is this correct?
I do not know about a GMC 1/2 ton long-bed, but if it is the same drive-train as used in a 1954 GMC 3/4 ton, it has an open drive shaft. Is this correct?
| | | | | Joined: Aug 2001 Posts: 1,299 'Bolter | | 'Bolter Joined: Aug 2001 Posts: 1,299 | Tim, The same question is on the OGMC site. I pointed him to Cletis differences website but would like to find Andy's picture of all the H-M conversion parts. Do you have that picture handy? You know the one where he was selling the conversion kit all together. | | | | | Joined: Dec 2011 Posts: 23 Wrench Fetcher | | Wrench Fetcher Joined: Dec 2011 Posts: 23 | Yes it is a fully enclosed drive shaft. And my longbed is open drive shaft. I am don't know if I need carrier bearing set up because the frame is 10 inches longer. | | | | | Joined: Sep 2001 Posts: 29,269 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,269 | I cannot find Andy's photo of H-M parts - here or on oldGMCtrucks.com?
| | |
|
|
| |
