| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,188 Posts1,057,220 Members48,465 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2013 Posts: 235 Shop Shark | | Shop Shark Joined: Mar 2013 Posts: 235 | I took apart my vacuum wiper motor, cleaned it up and put lubricant in some strategic places. I was debating sending this to wiperman for restoration, but this looks to be working pretty well. Is the speed shown in this video about how it should perform? Ritchie's wiper motor video I think the PO installed the wiper arms in the wrong position on the serrated rotor so I have to figure out how to take the wiper arms off. Removal is not blatently obvious. Observations on motor speed and how to remove the wiper arms are appreciated. Bob | | | | | Joined: Jan 2013 Posts: 1,518 'Bolter | | 'Bolter Joined: Jan 2013 Posts: 1,518 | Looks good to me. I'd hook up all the linkage for the final test though.
1953 Chevrolet 3100261 cu inch, sm420, 3.55 rear, torque tube still,omaha orange, still 6 volt, RPO green glass, side carrier spare, all done In the DITY GalleryVideo of the 261 running1964 GMC 1000305 Big Block V6, sm420, the next cab off restoration
| | | | | Joined: Mar 2013 Posts: 235 Shop Shark | | Shop Shark Joined: Mar 2013 Posts: 235 | Worked great. The PO had the wiper arms in the wrong position. Once I got them in the right start and stop position they worked perfectly. Here are photos of the nagging little clips under the wiper arms. They were a pain and does not seem they do much, but maybe the photo will help someone understand them in the future. Wiper clip dis-assembled | | |
|
|
| |
