The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
9 - 11 Memorials

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
3 members (Otto Skorzeny, klhansen, Bwana-Jim), 75 guests, and 1 robot.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,036
Posts1,055,450
Members48,422
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#894391 11/04/2012 1:26 PM
Joined: Aug 2012
Posts: 45
A
Wrench Fetcher
Wrench Fetcher
A Offline
Joined: Aug 2012
Posts: 45
I have a '59 panel. There is a large void between the body panel and the inner wall that runs the length of the bed. This area is coated with rust. What are my options for dealing with this rust?

thanks


Is rust considered a body style?
arturo7 #894426 11/04/2012 4:52 PM
Joined: Apr 2005
Posts: 177
L
'Bolter
'Bolter
L Offline
Joined: Apr 2005
Posts: 177
if you have no rust through i would put por 15 in there [ use a good resperator if you spray it]

arturo7 #894447 11/04/2012 6:43 PM
Joined: Aug 2012
Posts: 45
A
Wrench Fetcher
Wrench Fetcher
A Offline
Joined: Aug 2012
Posts: 45
Thanks, Leonard. I figured it would take some type of spraying. But how do you spray inside a space that is 8' x 3' x 3" with limited access points?

Last edited by arturo7; 11/04/2012 6:44 PM.

Is rust considered a body style?
arturo7 #894551 11/05/2012 1:52 AM
Joined: Oct 2005
Posts: 4,249
"Hey! I sound like Darth Vader!!
"Hey! I sound like Darth Vader!!
Joined: Oct 2005
Posts: 4,249
Weed sprayer?

arturo7 #894770 11/05/2012 11:31 PM
Joined: May 2005
Posts: 8,983
B
Sir Searchalot
Sir Searchalot
B Offline
Joined: May 2005
Posts: 8,983
Depends if it is California surface rust or back east rot rust. Surface rust: Can't see it from the drivers seat. Rot rust: Power wash or sandblast and then bedliner spray or undercoat. But don't blast thru it. I never would feel good about just Por 15 right on old virgin rot rust. Maybe that's OK though.


Right is right, even if everyone is against it, and wrong is wrong, even if everyone is for it. - William Penn
bartamos #895497 11/08/2012 9:56 PM
Joined: Sep 2008
Posts: 293
W
'Bolter
'Bolter
W Offline
Joined: Sep 2008
Posts: 293
Eastwood sells rust-proofing stuff in a can with a long hose to spray inside enclosed areas, or through a hole. Could be convenient here.


'57 Chevy Suburban; '70 Chevy Impala.
arturo7 #895603 11/09/2012 12:20 PM
Joined: May 2005
Posts: 8,983
B
Sir Searchalot
Sir Searchalot
B Offline
Joined: May 2005
Posts: 8,983
There are three access covers on either side, on the inside of the panel truck, which provide access to the area you are speaking of if you can't reach from underneath.


Right is right, even if everyone is against it, and wrong is wrong, even if everyone is for it. - William Penn

Moderated by  MNSmith, Rusty Rod 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0