| |
Click on image for the lowdown. 
====
| | |
1 members (1 invisible),
108
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,196 Posts1,057,395 Members48,471 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2006 Posts: 99 Wrench Fetcher | | Wrench Fetcher Joined: Oct 2006 Posts: 99 | My GMC 270 cid engine's muffler is 4" away from the driveshaft carrier bearing- too close?
Dave
Well, my time went so quickly,
I went lickety-splitly
Out to my ol' 55.
As I pulled away slowly,
Feelin' so holy,
God knows, I was feelin' alive..... Tom Waits, Ol' 55
| | | | | Joined: May 2001 Posts: 1,907 'Bolter | | 'Bolter Joined: May 2001 Posts: 1,907 | I'd say probably not too close but to be safe you might first drive it for a while, stop and feel the bearing. Then idle it (like at a stop light) for a while and feel the bearing.
If you think the bearing is too warm you could you somehow fasten a shielding piece of sheet metal between the bearing and the muffler. Or maybe you could put crooks in the exhaust and tail pipes to move the muffler away a little bit. That might take new exhaust and tail pipes.
1948 3/4-Ton 5-Window Flatbed Chevrolet 34 Years. Now with a '61 261, 848 head, Rochester Monojet carb, SM420 4-speed, 4.10 rear, dual reservoir MC, Bendix up front, 235/85R16 tires, 12-volt w/alternator, electric wipers and a modern radio in the glove box.
| | |
|
|
| |
