| |
Click on image for the lowdown. 
====
| | |
13 members (Gdads51, Rusty Heaps, FishinToms53, MNSmith, NAPCOStormTrpr, Jon G, Otto Skorzeny, Cletus1950, Peggy M, Shaffer's1950, Leo, GDW, Hanks custodian),
99
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,139 Posts1,056,455 Members48,441 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#8840 11/27/2003 12:37 AM | Joined: Nov 2003 Posts: 5 Junior Member | | Junior Member Joined: Nov 2003 Posts: 5 | :confused: Working on a 66 Chevy C-10 250 6Cyl. What Power Steering Brackets can I use to mount the pump? | | | | | Joined: Aug 2000 Posts: 346 Shop Shark | | Shop Shark Joined: Aug 2000 Posts: 346 | chopper66, Welcome to the Stovebolt page. I saw this on ebay earlier today: Power Steering setup for 250 Chevy
'38 Chevy 1-1/2 ton
'49 Chevy 1/2 ton
'54 Chevy 6400 2 ton
'55.2 GMC 3/4 ton
'56 GMC 1-ton
No Room Left in Shop
| | | | | Joined: Apr 2000 Posts: 499 'Bolter | | 'Bolter Joined: Apr 2000 Posts: 499 | Try the "search" feature above.
Try early '70s Camaro, Nova, Omega and a few other GM cars in the bone yard. All of these used the 250.
That one on ebay that olblue mentioned looks like its only half there. It doesn't even look like any I have seen that fit the nonentegral head.
'67 GMC 3/4 292 4spd
| | | | | Joined: Oct 2003 Posts: 17 Member | | Member Joined: Oct 2003 Posts: 17 | I am putting a 250 in my 47. The brackets off of a 67 camaro will work just fine.
No hill for a climber!
| | |
|
|
| |
