| |
Click on image for the lowdown. 
====
| | |
0 members (),
61
guests, and
4
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,024 Posts1,055,395 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#80258 07/21/2007 2:54 PM | Joined: May 2007 Posts: 25 Apprentice | | Apprentice Joined: May 2007 Posts: 25 | For some that have followed my plight, I had a build up of pressure in my motor from a faulty oil breather along with the engine not running for almost 4 years - I have leaks (and I know they are normal  ) Well, here is my question - after cleaning my engine I started to see some oil moisture at the head gasket seal. It is not blown, things are clean so my question is - do you re-torque the head when this happens as a “Try it” type of thing? It is only in one spot in front of the distributor. Thanks - Rino
1950 AD Chevy
235 - 3 on the tree - straight pipe & cherry bomb - baaaam bam bam bam bam
I am no mechanic, but I am going to try on this one!
| | |
#80259 07/21/2007 3:21 PM | Joined: Nov 2005 Posts: 6,100 'Bolter | | 'Bolter Joined: Nov 2005 Posts: 6,100 | Hy mamboitaliano, It certanly won't hurt anything to retorque the head, but do it when the engine is cold, hope that helps | | |
#80260 07/21/2007 6:27 PM | Joined: Sep 2003 Posts: 1,820 Shop Shark | | Shop Shark Joined: Sep 2003 Posts: 1,820 | Let's be sure we are talking about the same thing here. When you say re-torque, does that mean loosen the head bolt and than torque it to specs again? Or do you mean check and be sure the head bolt is torqued to specs? I would not loosen the head bolt and torque it to specs again, but I would put the torque wrench on it and be sure it was tight to specs. Joe
"Truckin' Around .......... Since 1937!" My name is Joe and I am addicted to Classic Country Music. I just can't hep myself.Operators are standing by to take your calls! Now cruising in the Passing Lane | | |
#80261 07/22/2007 11:46 AM | Joined: Mar 2005 Posts: 311 Shop Shark | | Shop Shark Joined: Mar 2005 Posts: 311 | I agree with 6cylindersovertexas. My memory is faulty, but I think back in the day re-torqueing the head AND re-adjusting the valves after the engine was broke in (500-2000 miles) was practiced by more than one mechanic. And that was on engines that had no problems.
Always get a 2nd opinion, especially if I am the source of the 1st opinion.
| | |
#80262 07/22/2007 1:53 PM | Joined: May 2007 Posts: 25 Apprentice | | Apprentice Joined: May 2007 Posts: 25 | Thanks for the replys!
The engine is past broken in, but I will give it a try in the next few weeks and also adjust the valves. I have never done it but a buddy is going to coach me. If it works it will save pulling the head.
1950 AD Chevy
235 - 3 on the tree - straight pipe & cherry bomb - baaaam bam bam bam bam
I am no mechanic, but I am going to try on this one!
| | |
|
|
| |
