The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
9 - 11 Memorials

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
4 members (DaveV, baldeagle, 55shaker, jmoore), 79 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,014
Posts1,055,328
Members48,419
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#796045 11/08/2011 2:55 AM
Joined: Feb 2011
Posts: 81
T
Wrench Fetcher
Wrench Fetcher
T Offline
Joined: Feb 2011
Posts: 81
Talk about parking in the wrong spot! This truck had a small tree fall on it doing terrible damage. Is it repairable?
http://4.bp.blogspot.com/-Vydq8N_63h8/TriLNLXxz0I/AAAAAAAAAI8/GTp6KnAKoPA/s400/C10+Damage.jpg

Thanks
Tim

Last edited by timmc; 11/08/2011 2:56 AM.
timmc #796050 11/08/2011 3:18 AM
Joined: Sep 2011
Posts: 2,951
L
'Bolter
'Bolter
L Offline
Joined: Sep 2011
Posts: 2,951
We'll need better photos to see what's wrong. Can you post better photos?

Lugnutz #796052 11/08/2011 3:21 AM
Joined: Feb 2011
Posts: 81
T
Wrench Fetcher
Wrench Fetcher
T Offline
Joined: Feb 2011
Posts: 81
Jay,

I'll take some better shots this weekend when I bring it home. I think the cab is a loss but we'll see what the experts say!

Thanks
Tim

timmc #796054 11/08/2011 3:29 AM
Joined: Sep 2011
Posts: 2,951
L
'Bolter
'Bolter
L Offline
Joined: Sep 2011
Posts: 2,951
So now you have how many trucks? dang The most I had of the same car was 3 (66 Ford Galaxie 500).

Lugnutz #796061 11/08/2011 3:38 AM
Joined: Feb 2011
Posts: 81
T
Wrench Fetcher
Wrench Fetcher
T Offline
Joined: Feb 2011
Posts: 81
Well, gotta have donors! I might be your best friend if I have a part you need!...LOL wave

timmc #796063 11/08/2011 3:39 AM
Joined: Sep 2011
Posts: 2,951
L
'Bolter
'Bolter
L Offline
Joined: Sep 2011
Posts: 2,951
I am sending you a PM.

Lugnutz #796072 11/08/2011 3:52 AM
Joined: Sep 2010
Posts: 72
E
New Guy
New Guy
E Offline
Joined: Sep 2010
Posts: 72
That's a tough repair due to the hard spot at the drip rail and the bend above the glass. I would want a puller and a ram to do it right. Shops nowadays would likely want to replace the roof (and part way into the W/S opening)

Last edited by EtekRestos; 11/09/2011 2:59 AM.
EtekRestos #796309 11/09/2011 2:48 AM
Joined: Feb 2011
Posts: 81
T
Wrench Fetcher
Wrench Fetcher
T Offline
Joined: Feb 2011
Posts: 81
Replacing the roof is a possibilty but this ole boy ain't got the know how when it comes to that deep of a repair! dang

timmc #797604 11/13/2011 11:31 PM
Joined: Feb 2011
Posts: 81
T
Wrench Fetcher
Wrench Fetcher
T Offline
Joined: Feb 2011
Posts: 81

timmc #797612 11/13/2011 11:46 PM
Joined: Jul 2011
Posts: 785
M
'Bolter
'Bolter
M Offline
Joined: Jul 2011
Posts: 785
I would think you'd have good luck pulling that with use of a body clamp that would grab around the drip rail, similar to one of these:

http://www.stanzanitools.com/catalo...ries=/idliv_0=1/Pull%20clamps=/idliv_1=1

Definitely will need to remove what's left of the windshield, and the inner roof panel will likely need removal or an access hole cut to address the rest of the areas....

MPandC #797680 11/14/2011 2:20 AM
Joined: Feb 2011
Posts: 81
T
Wrench Fetcher
Wrench Fetcher
T Offline
Joined: Feb 2011
Posts: 81
Well, one thing is for sure I don't think I can hurt it any worse....lol.

Thanks for the reply.

Tim


Moderated by  klhansen 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0