| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,032 Posts1,055,528 Members48,425 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2011 Posts: 10 New Guy | | New Guy Joined: Aug 2011 Posts: 10 | I've searched some on the site and couldn't really find anything. Does anybody have any good tips or tricks to fix dents (some pretty big) in the side of a fleetside? I would really hate to cut holes in good metal to get to the bad metal! | | | | | Joined: Jul 2001 Posts: 3,887 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Jul 2001 Posts: 3,887 | questions should always include the year Ken, folks may not have noticed your other posts .... the only place on the 58/9 box that needs skill is the rocket, which can be straightened with the weld-on pin/puller technique - above and below is hammer and dolly work, accessible from both sides
Bill | | | | | Joined: Aug 2011 Posts: 10 New Guy | | New Guy Joined: Aug 2011 Posts: 10 | The year is 1959 for the Fleetside bed, according to the previous owner. 90% of the metal work is on the "rocket" so I need to get the weld-on pin/puller set up it sounds like. That's what I was afraid of anyway. | | |
|
|
| |
