| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,078 Posts1,056,031 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#71169 01/05/2007 2:53 AM | Joined: Nov 2005 Posts: 266 Shop Shark | | Shop Shark Joined: Nov 2005 Posts: 266 | I have an offer on a Borg-Warner R10H-1A 3 speed OD out of a 1959 Bel Air. He said that the previous owner said that everything worked when he bought the car. I was wondering if it would mate up with the bellhousing on my 250 with the standard 3-spd. What other modifications would I have to do with the conversion besides shortening the driveshaft, wiring everything together and mounting the pull-out cable in the cab? | | |
#71170 01/05/2007 3:10 AM | Joined: May 2006 Posts: 8,351 'Bolter | | 'Bolter Joined: May 2006 Posts: 8,351 | Should bolt up to the bellhousing with no problems. Not sure about the driveshaft, I didn't have to do anything to the shaft in the '55.
If you can't come up with an original control cable, I'd suggest using one for a power take off box. They're alot heavier that a standard type cable. I found that it works much better for the o/d application than a standard cable. You can also use a headlamp relay to actuate the solenoid. I used a 40 amp rated relay from Standard/Bluestreak that works very well.
Once you get it hooked up, you'll enjoy driving with it. Cuts the rpm quite a bit. I can run 65-70 mph in od at about 1900 rpm. That's running with 3.90 gears and 30" tires.
Bill Burmeister
| | |
#71171 01/05/2007 10:23 PM | Joined: Nov 2005 Posts: 266 Shop Shark | | Shop Shark Joined: Nov 2005 Posts: 266 | One more question, how hard is it to find a speedometer gear for these transmissions? I have a 3.73 in my truck if that helps any. | | |
|
|
| |
