| |
Click on image for the lowdown. 
====
| | |
7 members (52Carl, Robert Crandall, 1955 1 Series, Tinker5, Leo, Mike B, 1 invisible),
146
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,154 Posts1,056,863 Members48,456 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2010 Posts: 97 Wrench Fetcher | | Wrench Fetcher Joined: Oct 2010 Posts: 97 | There are two holes in the rear quarters on both sides of my 56 stepside. Does anyone know what these are for? Picture | | | | | Joined: Jul 2001 Posts: 3,887 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Jul 2001 Posts: 3,887 | nothing factory, something a PO did - mud flaps?
Bill | | | | | Joined: Jan 2008 Posts: 4,962 'Bolter | | 'Bolter Joined: Jan 2008 Posts: 4,962 | It may have had an aftermarket rear bumper with a trailer hitch. They used to bolt to the back fenders. Many of these bumpers were also cut out to allow the tail gate to drop all the way down. | | | | | Joined: Apr 2009 Posts: 164 Shop Shark | | Shop Shark Joined: Apr 2009 Posts: 164 | I bet those holes are from an old farm bumper, like the one in the picture here. | | | | | Joined: Sep 2006 Posts: 2,393 Shop Shark | | Shop Shark Joined: Sep 2006 Posts: 2,393 | Dual exhaust pipe extension bracket mounting points.
Drew
| | | | | Joined: Jan 2010 Posts: 126 Wrench Fetcher | | Wrench Fetcher Joined: Jan 2010 Posts: 126 | Those are "speed holes"... They make it faster.....  | | | | | Joined: Jul 2008 Posts: 1,262 Shop Shark | | Shop Shark Joined: Jul 2008 Posts: 1,262 | It may have had an aftermarket rear bumper with a trailer hitch. They used to bolt to the back fenders. Many of these bumpers were also cut out to allow the tail gate to drop all the way down. X2 I picked up a fender at a swap meet for my truck and it still has marks on it from an aftermarket "wrap around" bumper. It has a "rivnut" still in the fender that was used as the bumper mounting point. Here is a photo: http://good-times.webshots.com/photo/2783888980103882008CnDvzB | | |
|
|
| |
