| |
Click on image for the lowdown. 
====
| | |
3 members (JW51, tesa, Ponchogl),
49
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,076 Posts1,055,925 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#64221 08/11/2006 2:05 AM | Joined: Apr 2006 Posts: 36 Junior Member | | Junior Member Joined: Apr 2006 Posts: 36 | I'm trying to get my 1953 GMC 225 engine rebuilt and we are stuck without crank bearings. We have tried searching everywhere but no luck. Any suggestions would be greatly appreciated as this is the final piece of my restoration.
John | | |
#64222 08/11/2006 2:40 AM | Joined: Mar 2005 Posts: 1,636 'Bolter | | 'Bolter Joined: Mar 2005 Posts: 1,636 | | | |
#64223 08/11/2006 2:40 AM | Joined: Nov 2005 Posts: 6,100 'Bolter | | 'Bolter Joined: Nov 2005 Posts: 6,100 | Hy John, have you tried Egge machine. | | |
#64224 08/11/2006 2:41 AM | Joined: Nov 2005 Posts: 6,100 'Bolter | | 'Bolter Joined: Nov 2005 Posts: 6,100 | Hy John, have you tried Egge machine. | | |
#64225 08/11/2006 3:29 AM | Joined: Apr 2006 Posts: 36 Junior Member | | Junior Member Joined: Apr 2006 Posts: 36 | Thanks guys, I submitted a parts request on line tonight on Egge.
John | | |
#64226 08/11/2006 5:10 AM | Joined: Dec 2004 Posts: 1,897 Shop Shark | | Shop Shark Joined: Dec 2004 Posts: 1,897 | gmc 225? there are plenty available for a gmc 228 on ebay | | |
#64227 08/11/2006 4:51 PM | Joined: Apr 2006 Posts: 36 Junior Member | | Junior Member Joined: Apr 2006 Posts: 36 | First of all I was wrong on the cid it is a 228. We needed 10 under bearings and they are out of those since Nov of '05. They do have 20 unders so we are going to grind the journals to that and we should be good to go. Thanks again for your help!!
John | | |
|
|
| |
