| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,068 Posts1,055,883 Members48,428 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2010 Posts: 3 New Guy | | New Guy Joined: Jan 2010 Posts: 3 | wanting to know what is the best primer for bare metal? thanks | | | | | Joined: Jan 2007 Posts: 93 Wrench Fetcher | | Wrench Fetcher Joined: Jan 2007 Posts: 93 | Best is epoxy primer. Many different brands out there. I use Kirker Enduro, but all manufacturers have an epoxy in their line up. Some are more easily sandable than others (Kirker sands very well after a few days). Some folks spray a urethane primer over the epoxy within the epoxy's recoat window since urethane is much easier to sand. Each manufacturer has instruction sheets that outline procedures for their product that are very helpful.
Regards,
Steve
New Orleans | | | | | Joined: Jan 2010 Posts: 3 New Guy | | New Guy Joined: Jan 2010 Posts: 3 | thanks steve,thats what i needed to know, | | |
|
|
| |
