| |
Click on image for the lowdown. 
====
| | |
8 members (baldeagle, Woogeroo, Nick in Manitou, Jon G, FAST55, Hanks custodian, mick53, 50Chevy3100),
62
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,014 Posts1,055,332 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#42613 03/19/2002 5:37 AM | Joined: Jun 2001 Posts: 8 Junior Member | | Junior Member Joined: Jun 2001 Posts: 8 | Taking a hydraulic 5 speed out of a 90 model 1/2 ton chevy trk,and putting a old 4 speed in its place.I have been told that I will have to use 85 or86 bell housing that uses a slave cylinder,but I ran across a build up in one of my mags,that showed a quartermaster hydraulic release bearing which eliminates the slave cylinder.Does anyone know anthing about this,or anything that might work.
so many trucks ,so little time
| | |
#42614 03/19/2002 6:34 AM | Joined: Mar 2001 Posts: 22 Member | | Member Joined: Mar 2001 Posts: 22 | McLeod makes a hydraulic throwout bearing. Expensive, don't have any experience with using it, but some have used it to solve your problem. McLeod Home page | | |
#42615 03/20/2002 3:39 AM | Joined: Mar 2001 Posts: 316 Member | | Member Joined: Mar 2001 Posts: 316 | Speaking of clutches, what ever happened to Hayes? I used an 11" street/strip clutch from them in front of an M-22 4 speed in my '68 Malibu. Never slipped and got some hard use!  
*** GMC ***
| | |
|
|
| |
