The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
9 - 11 Memorials

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
4 members (TexasA&M48Truck, Mike B, 1955 1 Series, baldeagle), 121 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,026
Posts1,055,409
Members48,422
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#398535 04/06/2008 4:03 PM
Joined: Feb 2005
Posts: 338
B
Shop Shark
Shop Shark
B Offline
Joined: Feb 2005
Posts: 338
Well I guess I'd be a bit stiff after sitting for 6 months if I was 68 years old.

I went to get my truck out of storage and I was surprised to find the clutch pedal was extreamly difficult to push and once I got it pushed in it wouldn't return either. After pushing and pulling the pedal many times it limbered up enough for me to gingerly drive the mile and 1/2 home.

Once I got the pedal freed up a little it would spring back an inch or so, but I had to pull it all the way back with my foot to get the clutch to engage.

Anyone had this problem before? It feel like an issue with the pedal, but I assume it is something wrong with the clutch, pressure plate and throw out. I will have to get under there and take a look.

Thanks for any help.



Bill Schickling

1940 1/2 ton, 1940 3/4 ton
My web page
Joined: Jun 2004
Posts: 8,597
W
Riding in the Passing Lane
Riding in the Passing Lane
W Offline
Joined: Jun 2004
Posts: 8,597
There is a grease fitting on the shaft under the floor. Grease that & spray some lube on the linkage & it will free up. Make shure it has a return spring.


They say money can't buy happiness. It can buy old Chevy trucks though. Same thing.
1972 Chevy c10 Cheyenne Super
In the Gallery Forum
Joined: Feb 2005
Posts: 338
B
Shop Shark
Shop Shark
B Offline
Joined: Feb 2005
Posts: 338
Wrenchbender Ret.

Thanks. I'll try that. I rebuilt the trasmission about 4 years ago. Not being very bright, I didn't change the clutch, pressure plate, etc... at that time.

I'm not really looking forward to disconnecting the torque tube, removing the tranny and all that, so I hope your advice will clear up the problem.


Bill Schickling

1940 1/2 ton, 1940 3/4 ton
My web page

Moderated by  Phak1, Woogeroo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0