The Stovebolt Site Forums The Shop Area Paint and Body Shop Doors weatherstrip orientation

Searched threads, found picture, but could not determine the orientation of the weatherstrip for my 54 door. It has 3 flat sides, the fourth has a "V" can anyone tell me which part gets glued to the door? The sides of the "V" are different length. Thank you, Scott

What would be the bottom of the "V" is what fits into the grove around the door. The short leg goes toward the inside of the cab. This is shown in detail on page 1-17.00 of the Factory Assembly Manual.

don't let these decieve you as the rubber moulding bends around the door to follow is own edge.... I started at the bottom w/ the ends.
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=014_14.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=013_13.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=012_12.jpg
&&
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=0465700-R1-033-15.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=0465700-R1-031-14.jpg
https://www.stovebolt.com/ubbthread...p&topic=0&Search=true#Post165337
https://www.stovebolt.com/ubbthread...p&topic=0&Search=true#Post165337
https://www.stovebolt.com/ubbthread...p&topic=0&Search=true#Post162373
https://www.stovebolt.com/ubbthread...p&topic=0&Search=true#Post164385
i believe
As the weather strip rolls around the door edge so the strip follows.

A picture is truly worth a thousand words. Thank you, Scott