| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | |
1 members (baldeagle),
28
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,004 Posts1,055,246 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: May 2005 Posts: 8,878 . | | . Joined: May 2005 Posts: 8,878 | ... and Cornwall tools, and they cost a lot less then Snap On. Last year a guy in the shop I was working at bought a set of Cornwell wrenches, tried them, but ended up not liking them, a personal preference. So he returned them, and bought an identical set of Snap-On wrenches, the Snap-on set was cheaper, not by much, but it was none the less. Grigg | | | | | Joined: Jan 2008 Posts: 85 Wrench Fetcher | | Wrench Fetcher Joined: Jan 2008 Posts: 85 | I started getting evercraft tools from NAPA in town.So far I'v been happy with them,but I have only had them a year.The only thing I don't like is the ratchets are a little loose so it takes some room to get them to ratchet,but they are strong i'v had a pipe on mine a few times now and it works as good as the day I got it. | | | | | Joined: Sep 2003 Posts: 1,820 Shop Shark | | Shop Shark Joined: Sep 2003 Posts: 1,820 | I recently was introduced to Alden wrenches. Anyone ever used them? Alden's are open end wrenches that ratchet. I have seen them at acouple of independent parts store and on EBay. I have not used them, but have been tempted to give them a try. www.aldenwrench.netJoe 
"Truckin' Around .......... Since 1937!" My name is Joe and I am addicted to Classic Country Music. I just can't hep myself.Operators are standing by to take your calls! Now cruising in the Passing Lane | | | | | Joined: Dec 2003 Posts: 1,554 Shop Shark | | Shop Shark Joined: Dec 2003 Posts: 1,554 | Seems like there are a lot of opinions on tools here. I am happy with my Craftsman hand tools,and a lot of others are happy with what ever brand they have chosen.Aint it nice that here in America,we have a choice of what to buy. | | | | | Joined: Jan 2008 Posts: 85 Wrench Fetcher | | Wrench Fetcher Joined: Jan 2008 Posts: 85 | For me it was the cost of getting replacments.Napa is in town where I work.But the closest place to get craftsman replaced is 50 miles.Didn't want to spend $12.00 of gas to replace a 15.00 tool. | | | | | Joined: May 2007 Posts: 95 Wrench Fetcher | | Wrench Fetcher Joined: May 2007 Posts: 95 | I wondered about Napa Tools. So i did some research http://news.thomasnet.com/companystory/483466Seems to big one of those big umbrella corp's I hear you can order S/K thru your Napa. | | | | | Joined: May 2006 Posts: 8,351 'Bolter | | 'Bolter Joined: May 2006 Posts: 8,351 | Danaher is also the parent company of Matco Tools.
Bill Burmeister
| | | | | Joined: Jul 2005 Posts: 2,031 Shop Shark | | Shop Shark Joined: Jul 2005 Posts: 2,031 | My grandfather would be 110 if he were alive today and my dad would be 83
My dad if he were alive today would be 104 & I'm not close to 60
Last edited by carolines truck; 03/06/2008 6:12 AM.
Jim & Caroline
The highway is for gamblers, better use your good sense."
Gooday-that's my 1¢ answer due to the lousy economy ~ cause I ain't got - no . mo . doe
Every Shaver | Now Can Snore | Six More Minutes | Than Before ... | Half A Pound for Half a Dollar | Spread On Thin | Above the Collar || BURMA-SHAVE
| | |
|
|
| |
